LABCENTRE ELECTRONICS ISIS PROTEUS TUTORIAL

In this tutorial I am going to tell you about the basics of LABCENTRE ELECTRONICS ISIS PROTEUS .this software is widely used by all the electrical  engineers as it provides a mean for testing their circuits before implementing them practically.

So, first of all let have a look at the opening window of the LABCENTRE ELECTRONICS ISIS PROTEUS.

I am using the LABCENTRE ELECTRONICS ISIS PROTEUS 7.6 .

This is the window which we see when we open the LABCENTRE ELECTRONICS ISIS PROTEUS 7.6.

Lets first become familiar with different icons in it.

  VIRTUAL INSTRUMENT MODE:

 This icon is for measuring the different parameters of the circuit like voltage, current output waveforms etc and. It provides us with AC voltmeter and ammeter and DC voltmeter and ammeter and it has also got the option of the oscilloscope for seeing the different waveforms and a logic analyzer for observing the logic states. It has also got the option of signal generator for providing waveforms of different shapes, different frequencies and different amplitudes.

PROBES:

They are used to measure the voltage aur current at the point in the circuit where they are placed.

GENERATOR MODE:

This mode is used for different voltage supplies like

1.sin wave

2.pulse

3.exponentail

4.dc voltage

5.clock

Etc

SIMULATION ICONS:

These icons are used to start, stop or pause the simulation or in the debugging mode for jumping to next step

COMPONENT MODE:

This mode is used to get all the components that are going to be used in the circuit like resistors, capacitors, microcontrollers, op-amps, diodes, inductors, microprocessors, in other words almost  every component that you require LABCENTRE ELECTRONICS ISIS PROTEUS provided you under this icon.

TERMINAL MODE:

This icon of the LABCENTRE ELECTRONICS ISIS PROTEUS as its name shows is for the terminals of the circuit i.e. labeling the terminal as input, output or power or for connecting a particular terminal of a circuit to the ground.